Choosing The Right Pipe For Drains In Your Home

Choosing The Right Pipe For Drains In Your Home
Agriculture, Fishing & Forestry

Pipe prices and types on the market turned out to be quite varied. Usually, for household water lines, the types of pipes commonly used are PVC and PE pipes. As for the types of metal pipes, their use has begun to decrease. Even so many never know, what brand of the pipe is of good quality. Most people choose the type of plumbing by looking at the price of the cheapest pipes without knowing the quality of the pipes. To select the type of pipe, you can consult us on plomeros monterrey who are also ready to help you to repair damaged pipes.

To make it easier for you to better know which pipes you really need, here are a few tips on choosing the plumbing needs for drains in your home!

– Make sure you recognize the types of pipes
As mentioned in the initial paragraph, the types of pipes that are now widely used are PVC (polyvinyl chloride) and PE (polyethene). This type of PVC pipe is also referred to as a white pipe. The basic material uses plastic in a form that tends to be stiff and hard. This type of pipe we usually see in homes as a channel for drainage of water from the roof of the house. By the way, PVC pipes are generally sold with a minimum length of 4 meters, and generally, this type of pipe will require a connection.

PE pipes are different from PVC pipes because they are far more elastic and can be rolled up. Black and yellow pipes are sold in the form of long rolls, so they don’t need a lot of fittings. PE pipe itself is used for clean water lines or direct drinking water pipes.

– Also, understand about pipe specifications
To make it easier to assess the quality of the pipe, try pressing the pipe until the inside of the pipe meets each other. If there are no parts that are split or broken, then the pipe is of good quality for you to use.

If you need to be able to flow water with a high enough pressure, such as a pipe for this pump, of course, the type of pipe to be used must have different specifications. And the pipe needed is the AW pipe type, because this pipe has a thickness that is much greater than other pipes.

And for hot water channels, such as for the use of water heaters, the pipe specifications will also be different. Pipe specifications must be adjusted to the water heater. For that, be sure to choose a pipe that can withstand the heat of water produced by the water heater. There are 3 types of pipes for this need, you can choose between PERT, PEX, and PPR.

– Select the pipe according to size and also needs
The type of pipe that has a different function, the required size will also be different. For the use of clean water channels usually, have a larger size than the pipe for dirty water channels. Generally, clean water pipes will have a diameter of 0.5 inches to 1.5 inches.

For the needs as a dirty water channel, many sizes are commonly sold in the market, ranging from 2 inches, 3 inches, and 4 inches. The function of each size is different, it can also be used for rainwater drainage, drainage from the bathroom and laundry, and even as a drainage channel for removing impurities from the toilet.

– Don’t forget about fittings and adhesives
make sure you have prepared the equipment and glueing. For pipe fittings or connections, be sure to select one that suits your needs and adjust it to the pipe size that you choose. And at the time of fitting, you will carry out a cutting process to ensure each pipe length is by needs. As for adhesives, usually on the market, there are 2 types of ordinary adhesives or solvent cement.